Dust-Free Floor Sanding
in Godalming, Haslemere
& Surrounding Areas
Strip away years of wear and reveal clean, smooth timber, without dust settling all over your home. Our own extraction machines, your choice of finish, one fixed price.
Sanding That Leaves
Your Home Clean
Floor sanding removes the old finish, scratches and grime from a wood floor and creates a smooth surface ready for a fresh coat of oil or lacquer. Done well, it transforms a room. Done badly, it leaves dips, swirl marks and a house full of dust.
We sand with our own machines fitted with dust extraction. That means far less mess, no fine dust settling in other rooms and a cleaner finish because dust isn't trapped in the coating.
Sanding and refinishing suits original floorboards, solid oak, parquet and many engineered floors. We'll check your floor's condition and wear layer at the free visit and recommend the finish that suits your room.
Who this is for
- Original boards uncovered under carpet
- Oak and parquet floors that look dull or scratched
- Floors with orange or worn-out varnish
- Homes being refreshed before a sale or move
"We had so many issues with our floors, but they worked to find a solution. It did lead them to grind the floors back to concrete but they made sure it was a mess free process & now the floors look amazing."
The Risk of DIY
or Rushed Sanding
Floor sanding looks simple until a hired drum sander bites into the boards. Mistakes can't be undone, because the timber has gone.
Gouges and dips
Inexperienced use of a drum sander removes too much timber in one spot, leaving permanent dips.
Swirl and chatter marks
Skipping grits or using worn abrasives leaves marks that show through the finish.
Dust everywhere
Without good extraction, fine dust spreads through the whole house.
Wearing through engineered floors
Engineered boards have a limited wear layer. Oversanding can expose the core and ruin the board.
Common mistakes we see
- Hiring a sander for a floor you can't afford to damage
- Not checking the wear layer on engineered boards
- Applying finish over dust
- Choosing a finish without testing it on your floor
How We Do It,
Step by Step
The same people from first visit to final walkthrough. Harry surveys, Sam runs the job.
- 01
Free assessment
We check board condition, wear layer and repairs needed, and discuss finishes.
- 02
Fixed-price quote
One price covering repairs, sanding and finishing.
- 03
Repairs and preparation
Loose boards fixed, nails punched and gaps addressed before sanding.
- 04
Dust-free sanding
Progressive sanding with extraction, including edges and corners.
- 05
Finishing
Stain if required, then oil or lacquer applied in even coats.
- 06
Final walkthrough
We walk the finished floor with you, check every edge and threshold, explain how to look after it and leave the room clean and ready to use.
What You Get
When It's Done Right
Minimal dust
Our own extraction machines keep dust to an absolute minimum.
Like-new floors
Years of wear removed in a few days.
Costs far less than replacing
Keep your timber and transform its look.
Expert control
Only as much timber removed as needed, protecting future sanding.
Your choice of finish
Natural oil, hard-wearing lacquer, or a new stain colour.
Fixed price
No surprises once the job is agreed.
Sanding and Finishing
Options Explained
Choosing a finish is as important as the sanding itself. Here's how the options compare.
Original floorboards
Pine and other softwood boards in period homes often hide under carpet. Sanding reveals their character; gaps can be filled for warmth and a cleaner look.
Oak and hardwood floors
Solid oak can be sanded many times over its life, making it ideal for refinishing.
Parquet sanding
Parquet needs careful sanding across the grain directions of the pattern for a flat, even surface.
Engineered floors
Many engineered floors can be sanded, depending on the wear layer thickness. We check before quoting.
Oil finishes
Hardwax oils give a natural matt look and are easy to repair locally.
Lacquer finishes
Lacquer gives a hard-wearing surface for busy areas, in different sheen levels.
Staining
Change the tone of your floor, darker, lighter or neutralised, tested on your floor before we commit.
How many times can a floor be sanded?
It depends on how much timber sits above the tongue or the core. Solid boards can typically be sanded many times; engineered boards fewer, depending on the wear layer. Our approach removes only what's needed, so your floor keeps as much life as possible for the future.
Refreshing without full sanding
Sometimes a floor only needs a light abrade and a fresh coat rather than a full sand. If that's the case for your floor, we'll tell you, because it costs less and keeps more timber.
Before we arrive
- Clear the room of small items, ornaments and anything fragile.
- Tell us at the survey about any furniture that needs moving so we can plan for it.
- Let us know about pets, parking and access so the job runs smoothly.
- If you're supplying materials, have them delivered in good time.
- Plan where you'll live and walk while the room is out of use.
Looking after your floor
- Put felt pads under chair and table legs to prevent scratches.
- Use doormats at entrances to catch grit, the biggest cause of wear.
- Wipe up spills promptly rather than letting them sit.
- Clean with products suited to your floor's finish; we'll advise on the day.
- Use rugs in the busiest routes to spread wear over time.
Floor Sanding & Refinishing near you
We carry out floor sanding & refinishing for homeowners across these towns: floor sanding & refinishing in Godalming, floor sanding & refinishing in Haslemere, floor sanding & refinishing in Guildford, floor sanding & refinishing in Cranleigh, floor sanding & refinishing in Farnham, floor sanding & refinishing in Petworth, floor sanding & refinishing in Midhurst, floor sanding & refinishing in Chiddingfold, floor sanding & refinishing in Hindhead, floor sanding & refinishing in Woking and floor sanding & refinishing in Camberley, plus the villages in between. From Victorian terraces in Guildford to cottages around Petworth and Chiddingfold, we know the homes in this area and the floors they tend to have.
See all areasFloor Sanding & Refinishing
Questions Answered
Something else on your mind? Call Harry on 07748 146291.
We use our own machines with dust extraction, so the process is as close to dust-free as possible. Customers regularly comment on how clean we leave things.
Recent Floor Sanding & Refinishing
Projects
Reveal the Floor
You Already Own
Free site visit, honest advice and one fixed price for the job. Rated 5.0 on Google and insured to £2.5m.
Back to the homepage or see all services.